Saturday, 5 January 2019

TTQC January 05, 2019

How To Elmendorf Tear Tester TF140C II Textile Farm

Elmendorf Tear Tester TF140C

Elmendorf Tear tester, a computer controlled falling-pendulum instrument, to decide the ballistic tearing strength of textiles, plastics, paper or board. Elmendorf Tensile Testing Machine complies with ASTM D1424/1922/5734, ISO 1974/9290/6383-2, BS ISO 13937, etc. The tearing tester is further enhanced and supported by the easy to use the computer. Elmendorf Tear Strength Tester will show its good performance when you do the Elmendorf tear test.

Test Description

Application.

Product Elmendorf tearing strength tester (patented product), is used to determine the ballistic tearing strength of paper, textiles, plastics or board.

Elmendorf tear tester (protea) enables rapid determination of the dynamic resistance of materials designed to be subject to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboard, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc.

Elmendorf tensile testing machine is not applied to sparse fabric or stretch materials which the tearing direction might be the shift in the test.

Compressed air of 0.4~ 0.7 mPa is required.

How To Elmendorf Tear Tester TF140C

Features

Ø Works in accordance with all known test standards.

Ø The model is the only one that covers the most completed test range from 0 to 12800cN.

Ø RS-232 data output, equipped with Lenovo computer and Elmendorf tear test procedure, and Panasonic printer.

Ø The tensile testing equipment can be controlled by the large graphic touch panel without computer and software.

Ø Automatic specimen clamping and notching.

Ø Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena, thus ensuring perfect reproducibility of the experimental conditions.

Ø Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.

Specifications

Ø Capacity: 0-12800 grams (0 ~ 128N)

Ø Pendulum Range(cN): 0~ 1600, 0 ~ 3200, 0 ~ 6400, 0 ~ 12800.

Ø Accuracy: 0.2% of pendulum range.

Ø Unit: GF, MN, CN, CP, LB.

Included Accessories.

Ø TESTEX Elmendorf Tearing Test software.

Ø Complete with work pendulums
1600cN/g (3.5lb), 3200cN/g (7.0lb), 6400cN/g (14.0lb), 12800cN/g(28.0lb).

Ø 2 pcs of Cutting blades.

Ø 1 pc of Specimen cutting template.

Weight

105 kg

Power

220/110 V

50/60 Hz

0.5-0.7 Mpa

Dimensions

Width:	560 mm	Depth:	420 mm	Height:	530 mm
	22 inch		17 inch		21 inch

Standards

ASTM D1424	ASTM D1922	ASTM 5734	ISO 1974
ISO 6383-2	ISO 9290	BS ISO 13937	BS 3424
BS 4253	BS 4468	DIN 53862	DIN 53128
NEXT 17	M&S P29	INDA IST 100.1	AFNOR G 07-149
GB/T 3917.1	FZ/T 60006	FZ/T 7500

Test Method

Ø What is the Tear of Fabric?

Elmendorf tear definition refers to the phenomenon that yarn inside the fabric breaks one by one and tear the fabric into a crack when a part of the fabric edge is subjected to concentrated loading.

The Elmendorf tear strength of textiles is affected not only by the fabric’s properties but also by every finishing process of fiber. According to the actual development requirements of textiles, the American Society for Testing Materials (ASTM) has formulated a series of textile tearing strength standards (ASTM D1709, ASTM D1938, ASTM D1004 PDF, ASTM D1922 PDF, ISO 6388-2 PDF), and ISO followed these standards.

The tear usually occurs during the use of military uniforms, sails, tents, umbrellas, hammocks and so on, and tear strength is the greatest ability to resist tearing during the use of fabric. Elmendorf tear test is a common method for measuring tear strength, it is used to test various international standards according to the Elmendorf tear test formula. Elmendorf test can be used not only for testing the tear strength of the fabric, but also for testing the tear strength of some plastics and cartons.

Elmendorf Tear Test Procedure

1. Prepare samples: Make corresponding samples according to test standards.

2. Adjusting pressure gauge: Check whether the pressure gauge value is in the range of 0.6 ±1 MPa, otherwise, adjust the pressure relief valve to meet the requirements. Start the Elmendorf tearing tester, enter the working interface and set the corresponding parameters.

3. Zero adjustments and calibration: Adjust the Elmendorf tearing tester calibration according to the test manual, and adjust the angle, then return to the main page to start testing.

4. Sample test: Select suitable hammer to test all samples and save Elmendorf tear test results.

(For detailed steps, please refer to the Elmendorf tear test manual of random incidental)

Notice

1. Before using, place the hammer in place, tighten the jam hand wheels.

2. When the instrument works, keep your hands and head beyond the turning area of Handle 11; the handle should not touch any obstacles.

3. When the instrument has been unused for a long time, you should swing it for more times before use, and proceed with calibration operations.

4. Be sure to have the swing device in a locked state when moving the instrument.

5. No strong electromagnetic interference around.

6. Clean the Elmendorf tear test units when the instrument is not used, store the pendulum properly to avoid collision, friction or corrosion.

The machines for tear strength are in hot sales now! Welcome to contact us if you want to know Elmendorf tear tester price and how to use Elmendorf tear tester.

Textile Farm 0

Thursday, 8 November 2018

Washing November 08, 2018

Denim Garments Lycra Problems Resolve Solutions- Textile Farm

Causes and Remedies for Garment Lycra Denim.

We have a common problem for those who have oven dyeing Wasting. After the garments Spandex Damage, Spandex or Lycra Damage, the shipment is not canceled, the amount of wasting plant is less. You are the Garment's WAS expert, you need to have ideas on who or what you are careful about.

Causes and Remedies for Garment Wess Lycra Dames We have a common problem for those who have oven dyeing Wasting. After the garments garments Spadesx Damage, Spandex or Lycra Damage, the shipment is not canceled, the amount of wasting plant is less. You are the Garment's WAS expert, you need to have ideas on who or what you are careful about. I can comment if there is something out of Lycra Damage in my mind 1. The enzymes that hydrologize or break the cellulose fiber can break the fiber twist if bio degradation by enzymes that break Lycra due to excess pressure on Lycra, because of the Betting Actions of Was Machine. 2. If there is a fiber or brake due to the machine's firing in the fiber or the card or the rotatory, Lycra can be broken due to the weakness of the twist. 3. If the lycra blends fabric or garment is heavy, then it will be rubbed with a rubber ball or a stone without enzymes of its look. To avoid damages, it is best not to enzyme. 4. If the Lycra Blend fabric or garment dyeing or washer program is to be used, then pitch dyeing machine should be used. It does not contain much of the locker volume and the machine cylinder does not contain the battery, it turns the pedal locker at the top position of the machine, so that due to low body-to-body biting, there is less body damage than you can. Betting Action Front loading (Tonello, Ramsons), Bailey Machine (China) machine is much more than the beating pitch diving machine. 5. Special Lycra Protector should be used, which is not generic or Anti Sleeping Agent. A typical recipe for this is 15 gram per liter, which is 2 gram per liter in the factory. Image: Lycra Protector or Anti Sleeping Agent 6. Anti-slipping agents with anti-cruising 0.5 g, sewing assistants 0.5 g of 0.5 g waiting agent to use. Which is not followed much time. 7. When Hydro is extracted, it is found in the fact that the load is loaded on the back of the load condition. Load condition is due to the centrifugal force, due to body twisting, there is a likra damém's choice. Therefore, the reduction in loading of the screws of Lycra bodies will be reduced. And the speed RPM should be reduced so that the centrifugal force is less affected. 8. 50-60% Hydro and Warming Curving Machine, and the need to drive in the steam dryer. This will cause less stress on the Lycra Blend body. 9. Horizontal or Bailey Me shim Vertical Front loading Machine Betting of the body can be damaged by machine RPM. Less than 30 RPM It can be run on machine-to-body bits less than one. 10. M: L 1: 8, 1: 6, 1:10 The scope of Lycra should be run at 1:30 am in M: L, but the amount of chemical weightage is higher than body damage. 11. Hydro time for one piece, where 75 seconds can extract extracting time in Lycra body, such as 45 seconds. The area of 12 zipper should be changed after the per-processions such as during the time of discoloration, occasionally during the time of sublinging, after changing the position of the zipper after each process, there is a possibility of stress in one place and if there is a stress, then there is a possibility of going to the ground. The time of bleeding should be kept open during bleach. 13. If the access bartee stitch pocket belt is in the area of the loop, it is more than the pressure of the pressure or the bar tech stitch on the back pocket side, due to which there is more tendency to avoid spondylene outside of the stitch area. 14. Garment Allowance is uninstalled, for which it will be parked in the body. Body Damage is more due to Pakhering. 15. During the swing, many operators have dragged and swindled with tension, which means that Lycra took the Inside Tension, which later broke the heat on the Garments Watt and machine bits. 16. If the cutting blade is less in the cutting time, then during the fabric cutting, the core filaments are drawn from the interstitial condition of the tension. 17. Generally, if the widest width of the Oven Fabric Finnish is more than the widest, then the Lycra Damage is broken and the illness decreases. During the hit setting it will be better to set the hit. Oven Fabric Finnish width should be 52-53 ". 18. Dryer selections should be selected by our stem dryer. Leakra blend body cuts the steam dryer in the wound slowly and the temperature is inevitable, which does not have a bad effect on the body. Tempe re is less so damaged by low, our gas dryer should be avoided by the moisture content. The Temperature Control can not be controlled. 20. Must use caustic soda when blemishes are attached to the Denim Lycra Fabric. 21. For Lycra Fabric, you need to have 45 min 60 ° C dryer and non Lycra fabric for 35 min 80 ° C dryer..

Lycra Denim Fabric

I can comment if there is something out of Lycra Damage in my mind
1. The enzymes that hydrolyze or break the cellulose fiber can break the fiber twist if biodegradation by enzymes that break Lycra due to excess pressure on Lycra, because of the Betting Actions of War Machine.
2. If there is a fiber or break due to the machine's firing in the fiber or the card or the rotatory, Lycra can be broken due to the weakness of the twist.
3. If the lycra blends fabric or garment is heavy, then it will be rubbed with a rubber ball or a stone without enzymes of its look. To avoid damages, it is best not to the enzyme.
4. If the Lycra Blend fabric or garment dyeing or washer program is to be used, then pitch dyeing machine should be used. It does not contain much of the locker volume and the machine cylinder does not contain the battery, it turns the pedal locker at the top position of the machine so that due to low body-to-body biting, there is less body damage than you can. Betting Action Front loading (Tonello, Ramsons), Bailey Machine (China) machine is much more than the beating pitch diving machine.
5. Special Lycra Protector should be used, which is not a generic or Anti-Sleeping Agent. A typical recipe for this is 15 gram per liter, which is 2 gram per liter in the factory.

Lycra Garments

6. Anti-slipping agents with anti-cruising 0.5 g, sewing assistants 0.5 g of 0.5 g waiting agent to use. Which is not followed much time.

7. When Hydro is extracted, it is found in the fact that the load is loaded on the back of the load condition. Load condition is due to the centrifugal force, due to body twisting, there is a Lycra denim's choice. Therefore, the reduction in loading of the screws of Lycra bodies will be reduced. And the speed RPM should be reduced so that the centrifugal force is less affected.

8. 50-60% Hydro and Warming Curving Machine, and the need to drive in the steam dryer. This will cause less stress on the Lycra Blend body.

9. Horizontal or Bailey Me shim Vertical Front loading Machine Betting of the body can be damaged by machine RPM. Less than 30 RPM It can be run on machine-to-body bits less than one.

10. M: L 1: 8, 1: 6, 1:10 The scope of Lycra should be run at 1:30 am in M: L, but the amount of chemical weight is higher than body damage.

11. Hydro time for one piece, where 75 seconds can extract extracting time in Lycra body, such as 45 seconds.
The area of 12 zippers should be changed after the per-processions such as during the time of discoloration, occasionally during the time of sublingual, after changing the position of the zipper after each process, there is a possibility of stress in one place and if there is a stress, then there is a possibility of going to the ground. The time of bleeding should be kept open during bleach.

13. If the access barter stitch pocket belt is in the area of the loop, it is more than the pressure of the pressure or the bar tech stitch on the back pocket side, due to which there is more tendency to avoid despondency outside of the stitch area.

14. Garment Allowance is uninstalled, for which it will be parked in the body. Body Damage is more due to Gathering
.
15. During the swing, many operators have dragged and swindled with tension, which means that Lycra took the Inside Tension, which later broke the heat on the Garments Watt and machine bits.

16. If the cutting blade is less in the cutting time, then during the fabric cutting, the core filaments are drawn from the interstitial condition of the tension.

17. Generally, if the widest width of the Oven Fabric Finnish is more than the widest, then the Lycra Damage is broken and the illness decreases. During the hit setting, it will be better to set the hit. Oven Fabric Finnish width should be 52-53 ".

18. Dryer selections should be selected by our stem dryer. Lycra blend body cuts the steam dryer in the wound slowly and the temperature is inevitable, which does not have a bad effect on the body. Tempe re is less so damaged by low, our gas dryer should be avoided by the moisture content. The Temperature Control cannot be controlled.

20. Must use caustic soda when blemishes are attached to the Denim Lycra Fabric.

21. For Lycra Fabric, you need to have 45 min 60 ° C dryer and Lycra fabric for 35 min 80 ° C dryer.

Textile Farm 9

Tuesday, 14 August 2018

Washing August 14, 2018

HOW YOU CAN INCREASE YOUR PRODUCTION AND QUALITY IN LAUNDRY II TEXTILE FARM

HOW YOU CAN INCREASE YOUR PRODUCTION AND QUALITY IN LAUNDRY:

* System, cleanliness and discipline.

PRODUCTION AND QUALITY

* It must be a starting point always.

* It’s very important that facility analysis by done from a professional person with reports.

* Than you can see the first where you should focus on.

* For example for laundry time equal quantity, that’s why need to use correct washing recipes for reduce time to complete washes in short time.

* Need to use your machinery with full capacity.

PRODUCTION AND QUALITY

* It’s doesn’t matter you are working with big brands or no. You should improve product quality for your future.

* Have to give training to employers for change their attitude.

* Need to strong control from when you receive fabric in house till finished.

Note: Still there is so many things need to do .

MD.Mamun Kader Ansari.

Genaral Manager

Email:mamunansari@envoy-group.com

Textile Farm 0

Textile Farm

Breaking

Saturday, 5 January 2019

How To Elmendorf Tear Tester TF140C II Textile Farm

Elmendorf Tear Tester TF140C

Test Description

Application.

Product Elmendorf tearing strength tester (patented product), is used to determine the ballistic tearing strength of paper, textiles, plastics or board.

Elmendorf tensile testing machine is not applied to sparse fabric or stretch materials which the tearing direction might be the shift in the test.

Compressed air of 0.4~ 0.7 mPa is required.

Features

Ø Works in accordance with all known test standards.

Ø The model is the only one that covers the most completed test range from 0 to 12800cN.

Ø RS-232 data output, equipped with Lenovo computer and Elmendorf tear test procedure, and Panasonic printer.

Ø The tensile testing equipment can be controlled by the large graphic touch panel without computer and software.

Ø Automatic specimen clamping and notching.

Ø Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena, thus ensuring perfect reproducibility of the experimental conditions.

Ø Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and maintenance problems.

Ø Capacity: 0-12800 grams (0 ~ 128N)

Ø Pendulum Range(cN): 0~ 1600, 0 ~ 3200, 0 ~ 6400, 0 ~ 12800.

Ø Accuracy: 0.2% of pendulum range.

Ø Unit: GF, MN, CN, CP, LB.

Included Accessories.

Ø TESTEX Elmendorf Tearing Test software.

Ø Complete with work pendulums1600cN/g (3.5lb), 3200cN/g (7.0lb), 6400cN/g (14.0lb), 12800cN/g(28.0lb).

Ø 2 pcs of Cutting blades.

Ø 1 pc of Specimen cutting template.

Weight

105 kg

Power

220/110 V

50/60 Hz

0.5-0.7 Mpa

Dimensions

Width:

560 mm

Depth:

420 mm

Height:

530 mm

22 inch

17 inch

21 inch

Standards

ASTM D1424

ASTM D1922

ASTM 5734

ISO 1974

ISO 6383-2

ISO 9290

BS ISO 13937

BS 3424

BS 4253

BS 4468

DIN 53862

DIN 53128

NEXT 17

M&S P29

INDA IST 100.1

AFNOR G 07-149

GB/T 3917.1

FZ/T 60006

FZ/T 7500